86-10-58403169
Crane Industrial Park Changyuan County, Xinxiang, Henan, China
Port Container Gantry Crane With Drawing
Port Container Gantry Crane With Drawing
Lift capacity:25t~50t
Span:15m~30m
Lift height:Max.20m
Color: As your are requirement
Working duty:A5~A8
 | |
|---|---|
 | Port Container Gantry Crane With Drawing STRUCTURE |
| The crane structures designed to handle the extreme operating condition stipulated in the specifications. The girder structures either of fully welded rectangular or trapezoidal mono-box or twin box or plate girder constructions. The legs, portals and sill beams of fully welded box type structure made from mild steel plates conforming to BS4360 grade43. Lifting lugs for the whole crane by a mobile crane provided on the top of the legs. In designing for fatigue the crane shall be considered as subject to 2,000,000 cycles of operation and the weight handled taken as the safe working load of 40 tonne below the spreader. | |
 | Port Container Gantry Crane With Drawing STRUCTURE CLASSIFICATION |
| (a) Class of utilization - U7 (two million loading cycles) (b) State of loading - Q 2 (c) Group classification - A 7 (d) Impact factor - 1.3 (e) Duty factor - 0.95 (f) Nominal load spectrum factor - 0.63 of rated capacity. (Or as your requirement) | |
| Port Container Gantry Crane With Drawing |  |
| The wire ropes reeving configuration, and sheaves of the main hoist system designed to ensure that wire ropes do not dislodge from the sheaves (or jump off sheave groove) under any operating condition. The design shall prevent excessive slackening of the main hoist ropes and also limit the hoisting speed when the ropes are slack. Slack rope condition monitored through the load cells and back-up by limit switches installed at the girder end. Load cells provided for every hoist ropes. AC motors used for the main hoist system. The motors coupled to the reducer through gear couplings or flexible coupling. Two sets of fail safe disc brakes assemblies be fitted on the drive. The braking torque of each set of brakesat least 150% of rated load torques. Normal container handling operation with loads up to the rated capacity possible with only one set of brakes. | |
 | SPREADER LIST, TRIM AND SKEW ADJUSTING DEVICES: |
| The Crane equipped with spreader tilt and skew adjustment devices. The devices of sufficient stroke to tilt the spreader with a rated load to at least ±3 degrees (about a vertical plane). Sufficient clearance maintained between any part of the spreader (with flipper at raised position) and crane structures (e.g walkway leading to operator cabin) especially when trolling and spreader is tilted or skewed to the maximum. Tests for above requirement conducted during acceptance, testing and commissioning of the cranes. | |
 | Hot Sale 45t Container Gantry Crane OPERATOR'S CABIN |
| The operator's cabin firmly secured in a fail safe manner. The roof inclined to drain away rain water. Safe passage or walkway provided from the yard side leg to enable the operator to enter the cabin from the rear through a sliding door. Safe and easy escape from the cabin at any trolley position made possible for emergency purposes without having to move the trolley back to the parking position. | |
Established in August 2005, Nucleon (Xinxiang) crane Co., Ltd. is a Sino-Singapore joint venture and located in "China hoisting machinery of township" in Henan province. It covers an area of 320,000 square meters, existing staff 1,700.
As leading manufaturer with top certificates in the world, equiped with the most advanced production equipments, all these ensure the high quality products and excellent service.
In order to offer you a suitable design and best solution, Please tell us:
Or other special requirements you tell us would be more appreciated.
