86-10-58403169
Crane Industrial Park Changyuan County, Xinxiang, Henan, China
Brief Introduction of Nucleon crane 1 ton Jib crane
The Jib Crane is a type of crane that uses a mounted arm to lift, move and lower material. The arm, mounted either perpendicular to or an acute angle upwards from a column(pillar), may rotate along its central axis through a limited arc or a full circl. A column mounted jib crane is often used in industrial settings, like warehouses, to load and unload material.
Features of Nucleon crane 1 ton Jib crane:
1. The Jib Crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling.
2. This type machine is composed by the vertical shaft, revolving arm, rotating shaft, hoist etc, the bottom of the vertical shaft is fixed on the concrete base.
3. This type machine with advantages of the simple structure, operate convenience, turning agile, wide working conditions.
Control methods of Nucleon crane 1 ton Jib crane
Pendent line with press button or remote control or both
Application of Nucleon crane 1 ton Jib crane
It is widely used in mines, workshop, warehouse, harbours and so on.
Designation of Nucleon crane 1 ton Jib crane
Choose a single or double girder crane for your work area. A single girder crane can be either profile or box type girders. We can install an under-running crane if your building does not allow a column construction.
Structure of Nucleon crane 1 ton Jib crane
The steel structure is strong and built to last, optimized in design to reduce the stresses on your building. Your operators have good control over the load with stepless speed inverter control along the runway.
Advantages of Nucleon crane 1 ton Jib crane
Manually handling and combining or moving relatively a light load is often not only time-consuming, but also an ergonomic burden for employees. Together with a wide selection of hoist units, our slewing jibs and cranes installed direct at the workplace enable all types of work pieces to be lifted and transported quickly and easily and deposited gently and precisely. In this way, setting up and idle times can be significantly reduced and periods of waiting for workshop cranes to become available can be completely eliminated. Further strengths of our pillar and wall-mounted slewing jibs include:
|
Technical parameters of Nucleon crane 1 ton Jib crane
Load Capacity, t | Arm Length, A, m | Lift Height, h, m | Total Height, H, m | Lift Speed, m/min | Travel Speed, m/min |
0.5 | As Required | 1.5 | h+0.5 | 7 | 10/20 |
1 | As Required | 1.5 | h+0.55 | 8 | 10/20 |
2 | As Required | 1.5 | h+0.55 | 8 | 10/20 |
3 | As Required | 1.5 | h+0.6 | 8 | 10/20 |
5 | As Required | 1.5 | h+0.7 | 7 | 10/20 |
10 | As Required | 1.5 | h+0.75 | 7 | 10/20 |
QB Type Overhead Crane with 25t Lifting Weight
 |
 |
1. How can you ensure the safety?
Safety is the most important issue for crane. To ensure the safety, the following safety devices are equiped in DGcranes.
Crane traveling limit switch
Weight overload protection device
Lifting height limit device
Voltage lower protection function
Phase sequence protection function
Emergency stop function
Rain cover for outside hoist, driving units, electrical cubicle.
Warning indicator: flashing lights and warning sound.
Wireless infra-detector for anti-collusion
2. What kind of after-sale services will you supply?
One year warranty.
Providing free quick-wear part.
Low charge for continue maintenance when warranty is expired.
Exclusive engineer support at any time.
We can provide free training to end-users.
3. Can you make customized products?
Yes, of course. You can send your workshop pictures or drawings, or just tell us your special demands,
our engineers can make optimal design for you.
4. Can you supply the quality certification?
Yes, all kinds of certification are available, if you have any doubt, come to our factory and test it by yourself,
or you can let some third-partied to do the inspection for you.
5. How can I install the crane?
Our engineers can come to your work site to guide the installation.
6. Can I have a visit to your factory?
You can come to our factory anytime when you are convenient. We will make arrangement to pick you up.
How to choose a suitable electric hoist? |
1. Jib crane Maximum lifting weight ton? |
2. Jib crane Maximum lifting height meter? |
3. Jib crane lifting speed m/min? |
4. Do you need special customise? |
If you need jib crane system, kindly contact us online or send email to us. We will try our best to help you choose the best quality, lowest price of the crane!
