86-10-58403169
Crane Industrial Park Changyuan County, Xinxiang, Henan, China
Product name: Rubber Tyre Gantry Crane, Port Container Crane
Brief introduction: International Qualtiy China Power
Nucleon(Xinxiang) Crane Company could supply you high quality container crane, including rail mounted gantry crane (RMG crane) and rubber tyred gantry crane(RTG crane), widely applied to lift 20ft containers, 40ft containers and 45ft containers with special lifting spreaders.
1. Rail mounted gantry crane (RMG crane)
| Rail mounted gantry crane technical specifications | ||||
| Capacity | t | 35 | 40.5 | |
| Span | m | 30 | 22 | |
| Lifting Height | m | 16 | 12.3 | |
| Work Duty | m | A6 | A7 | |
| Type of Container | 20' 40' 45' | |||
| Speed | Hoisting | m/min | 0~10 | 10/18 |
| Crab Travelling | 3.4~34 | 40 | ||
| Trolley Travelling | 2.9~29 | 45 | ||
| Rotation | r/min | - | 1.35 | |
| Rail | P43 | QU70 | ||
| Power | 3-Phase A.C. 380V 50Hz | |||
2. Rubber tyred gantry crane(RTG crane)
Rubber tyred gantry crane technical specifications
Rubber-tyred Container Gantry Cranes(RTG)are special equipment to remove, load and unload containers. Running and moving in the yard, it has the advantage of high production efficiency and fine maneuverability. RTG has tractor trolley and standard trolley two models. RTG is powered by cable drum. At the same time, diesel generating set is equipped for conditions when the power is off or the crane moves to another yard.
Environmental Conditions:
1,The power source is three-phase alternating current,rated frequency is 50HZ,rated voltage is 380V.
2,The working environment temperature ranges from -20℃ to +45℃ and the relative humidity is no lower than 95%(with dew).
3,In-service, the wind speed should be no higher than 20m/s; out-of-service, the wind speed should be no higher than 44m/s.
4,The group classification of the crane is A6 or A7.
5,The gradient of crane traveling floor should be less than 1% and part of that should be no more than 3%.
6,The crane which has the special requirement for working conditions, can be manufactured following the contracts.
| Model | LJ35/40-23 | LightType LJ40-23 |
| Capacity(under spreader) (t) | 35,40 | 40 |
| Work Duty | A7,A8 | A6,A7 |
| Span (m) | 23.47 | 23.47 |
| Lifting Height (m) | 12.2~17.8 | 16.5 |
| Stack Layers/Passing Layers | 3/4~5/6 | 5/6 |
| Container Model | 20',40',45' | 20',40',45' |
| Spreader Rotating Angle | ±5° | ±5° |
| Hoisting Speed (m/min) | 13/26,23/52 | 12/18,18/28 |
| Cross Travel Speed (m/min) | 50,70 | 24 |
| Long Travel Speed (m/min) | Full Load-90,Without Load-130 | Full Load-20,Without Load-40 |
| Max.Wheel Load (kN) | 310 | 310 |
| Total Rating (kW) | 150,230 | 110,150 |
| Power Supply | Electric,Diesel engine,Electric-Diesel drive | |
NUCLEON meets the factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace, military and other industries of universal bridge crane, overhead crane, eot crane, door crane, universal gantry crane, rubber tyre and rail mounted container gantry crane four link type portal crane, quayside container crane, crane, crane hook, mining grab crane, gantry crane, ship loader, grab bucket ship unloader, stacker reclaimer, dredger, mobile platforms and other types of hydraulic crane technical requirements. Achieves great achievements especially in European Style Light Weight Cranes and KBK Flexible Beam Crane System.
Nucleon (Xinxiang) Crane co., ltd., founded in?2005, the registered capital of 270 million Yuan, covers an area of 450000 square meters, staff 1700 people. Achieves ISO production system certification and europe standards like?DIN & FEM.Nucleon is a bridge, gantry crane, coal series hoisting equipment, small light lifting equipment and other products of research and development, manufacture, installation, sales and service as one of the Sino-foreign joint ventures. The ND, NH model wire rope electric hoist, NL type chain electric hoist, mine explosion-proof hoist, HD type electric single-girder, NLH type electric hoist bridge crane in the domestic leading level, the electric hoist production for many years ranking second in the country.
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and trolly/winch are packed by plastic woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by container.
4. Big size, usually by bulk ship or by container after truncation.
5. Transport ways are based on reducing cost & keep safety.
Company main products has been widely used in metallurgy, electric power, petrochemical, military industry, coal, aerospace, construction, railway and other national economic pillar industries. Products are exported to Europe, Africa, Southeast Asia, more than countries and regions. Customers are satisfied with the products quality and service. They comment NUCLEON?a supplier worthy of cooperation!
Just send your inquiry in the textbox?below!
